User manual

18 Options (sold separately)
−139−
• Connection cable set
A cable set is needed to connect the motor and driver.
Each set consists of two cables, one for motor and the other for encoder.
The cable set for electromagnetic brake motor consists of three cables, one each for motor, encoder and
electromagnetic brake.
• For standard motors • For electromagnetic brake motors
Model Length [m (ft.)] Model Length [m (ft.)]
CC050VNF 5 (16.4) CC050VNFB 5 (16.4)
CC070VNF 7 (23) CC070VNFB 7 (23)
CC100VNF 10 (32.8) CC100VNFB 10 (32.8)
CC150VNF 15 (49.2) CC150VNFB 15 (49.2)
CC200VNF 20 (65.6) CC200VNFB 20 (65.6)
Pin assignments of cable for motor connector
Pin No. Color Lead size
1 Red
2 White
3 Black
4
Green/
yellow
AWG16 (1.25 mm
2
)
1
2
3
4
Model: 350780-1 (Tyco Electronics AMP)
Pin assignments of cable for encoder connector
Pin No. Color Lead size
1 Green AWG18 (0.75 mm
2
)
2 Black AWG18 (0.75 mm
2
)
3 Red AWG24 (0.2 mm
2
)
4 White AWG18 (0.75 mm
2
)
5 Yellow AWG24 (0.2 mm
2
)
6 Brown AWG24 (0.2 mm
2
)
• Motor side
2
4
65
3
1
Model: 54280-0609
(Molex)
• Driver side
2
4
65
3
1
Model: 55100-0670
(Molex)
Pin assignments of cable for electromagnetic brake connector
Pin No. Color Lead size
1 White
2 Black
AWG20 (0.5 mm
2
)
2
1
Model: 5559-02P-210 (Molex)