User manual

19 References
−177−
Parameter/operation data
OPX-2A screen
display
Name Setting range Initial value
− − − −
− − − −
APP-2-03 Analog torque command gain 0 to 300 [%] 30
APP-2-05 Analog torque command offset voltage −1.00 to 1.00 [V] 0
APP-2-06 Analog input signal automatic offset
0: Disable
1: Enable
0
trq Torque command 0 to 300 [%] 0
− − − −
APP-2-00 Analog speed limit gain 0 to 5500 [r/min] 550
APP-2-01 Analog speed limit clamp 0 to 500 [r/min] 10
APP-2-02 Analog speed limit offset voltage −1.00 to 1.00 [V] 0
APP-2-06 Analog input signal automatic offset
0: Disable
1: Enable
0
rEv Analog input signal automatic offset 0 to 5500 [r/min] 0
− − − −
SyS-1-05 Analog input signals
0: Disable
1: Enable
1
SyS-1-06 Motor rotation direction
0: + = CCW
1: + = CW
1
− − − −
− − − −
− − − −
APP-1-02 Output signal selection 1
0: WNG output
1: MOVE output
2: MBC output
0
APP-1-08 Minimum ON time for MOVE signal 0 to 255 [ms] 5
− − − −
APP-1-02 Output signal selection 1
0: WNG output
1: MOVE output
2: MBC output
0
− − − −
SyS-0-02 Encoder output electronic gear A 1 to 1000 1
SyS-0-03 Encoder output electronic gear B 1 to 1000 1
APP-1-03 Output signal selection 2
0: ZSG2 output
1: NEAR output
0