User manual

19 References
−178−
Item Overview
Standard
specification
Extended
function
The ZV output will turn ON when the detected speed drops into the speed
range set by the zero speed output band.
Not
available
Available
ZV output
Set the band within which the ZV output turns ON.
Not available Available
Alarm code When an alarm generates, a corresponding alarm code will be output based
on the READY output, VLC output and ZSG2/ZV output.
Not
available
Available
Output a voltage according to the detected speed. Available Available
Set the maximum analog speed to be monitored. Not available Available
Set the maximum voltage for monitored analog speed. Not available Available
Analog speed monitor
Set the offset value for monitored analog speed.
Not available Available
Output a voltage according to the detected torque. Available Available
Set the maximum analog torque to be monitored. Not available Available
Set the maximum voltage for monitored analog torque. Not available Available
Analog torque monitor
Set the offset value for monitored analog torque.
Not available Available
Data-setter initial
display
Set the initial screen on the OPX-2A. In the torque control mode, the top
screen of the monitor mode will become the initial display if the selected item
cannot be displayed.
Not
available
Available