User manual

10 Functions and operations in the speed control mode
−71−
10 Functions and operations in the speed
control mode
The following functions are available in the speed control mode:
• Speed controlled operation...............The motor speed is controlled.
• Torque limit......................................The maximum output torque of the motor is limited.
• Tuning ..............................................Operations are performed via automatic tuning. Gain adjustment is
also possible according to the load inertia or mechanical rigidity.
10.1 Quick operations
If you are new to the NX series driver, read this chapter and you will be able to perform basic motor
operations.
Note
Before operating the motor, check the condition of the surrounding area to ensure safety.
STEP 1 Check the installation and connection
Check
Motor and driver installation
Programmable
controller
Check
Motor connection
Check
Power supply
connection
Check
BRAKE input and CW
(CCW) input connection
Check
CN1 connector connection
Check
Encoder connection
P.45
P.31
P.21
P.4 3
P.3 2
P.31