User manual

10 Functions and operations in the speed control mode
−74−
Item Description
OPX-2A screen
display
Reference
Analog speed monitor
maximum value
Sets the maximum value of monitored analog speed. This setting
determines the slope of output of monitored analog speed.
[APP-2-07]
Analog speed monitor
maximum voltage
Sets the monitored output voltage corresponding to the
maximum value of monitored analog speed.
[APP-2-08]
Analog speed monitor
offset voltage
Sets the offset voltage for monitored analog speed.
[APP-2-09]
p.124
Analog torque monitor
maximum value
Sets the maximum value of monitored analog torque. This setting
determines the slope of output of monitored analog torque.
[APP-2-10]
Analog torque monitor
maximum voltage
Sets the monitored output voltage corresponding to the
maximum value of monitored analog torque.
[APP-2-11]
Analog torque monitor
offset voltage
Sets the offset voltage for monitored analog torque.
[APP-2-12]
p.125
Mechanical rigidity setting
switch
Changes the setting to enable/disable the mechanical rigidity
setting switch (SW2) on the driver.
[APP-4-00] p.87
 System parameters
Item Description
OPX-2A screen
display
Reference
Encoder output electronic
gear A
Sets the denominator of the electronic gear for encoder output.
[SyS-0-02]
Encoder output electronic
gear B
Sets the numerator of the electronic gear for encoder output.
[SyS-0-03]
p.123
Operation selection after
stopping in speed control
mode
Sets how the motor should operate after stopping in the speed
control mode. [SyS-1-02] p.78
Analog input signals Changes the setting to enable/disable the analog input signals. [SyS-1-05] p.75
Motor rotation direction Select rotation direction of the motor. [SyS-1-06] p.79