User manual

3 System configuration
−9−
Mechanical rigidity setting switch
What is set with this switch varies
depending on the control mode.
Internal potentiometers
(VR1, VR2)
What is set with each switch varies
depending on the control mode.
Pulse input mode selector switch
(SW1-4)
Use this switch to set the pulse
input mode.
Absolute system setting switch
(SW1-3)
Set this switch when the absolute
function of the driver is used by
connecting a battery.
Control mode setting switches
(SW1-1, 1-2)
Use these switches to set the control
mode of the driver.
Data setter OPX-2A
Or
Pulse generator or
programmable controller
PC in which the data setting software
MEXE02 has been installed
The customer must provide a PC.
Easy setting using switches!
Easy setting using switches!
Easy setting using switches!
Extend functions are made available
Extend functions are made available
through use of options (sold separately)!
through use of options (sold separately)!
Extend functions are made available
through use of options (sold separately)!
Analog I/Os
Connect an external
potentiometer or external DC
voltage. A set of CN6 connector
and variable resistors is available
as an option (sold separately).
P.52
P.56, 62
P.32
P.42