User`s manual

54(110) CABLING AND CONNECTIONS
6
6.1.5.2 NX frames and installation of cables
Note: In case you want to connect an external brake resistor, see separate Brake Resistor Manual. See
also Chapter 'Internal brake resistor connection (P6.7.1)' on page 98 in this manual.
Figure 6-7. NX, FR4
Figure 6-8. Cable installation in NX, FR4
NOTE: Two protective conductors are required for FR4 according to standard EN61800-5-1. See page 56
and chapter 1.3.
Mains cable Motor cable
Earth terminals
Brake resistor
terminals
DC-terminals