User`s manual

88(110) CONTROL KEYPAD

7.3.5 Fault history menu (M5)

The Fault history menu can be entered from the Main menu by pushing the Menu button right when the

location indication M5 is visible on the first line of the keypad display. Find the fault codes in Table 7-4.

All faults are stored in the Fault history menu in which you can browse through them using the Browser

buttons. Additionally, the Fault time data record pages (see Chapter 7.3.4.3) are accessible at each fault.

You can return to the previous menu anytime by pushing the Menu button left.

The memory of the frequency converter can store a maximum of 30 faults in the order of appearance. The

number of faults currently in the fault history is shown on the value line of the main page (H1ÆH#). The

order of the faults is indicated by the location indication in the upper left corner of the display. The latest

fault carries the indication F5.1, the second latest F5.2 etc. If there are 30 uncleared faults in the memory

the next occurring fault will erase the oldest from the memory.

Pressing the Enter button for about 2 to 3 seconds resets the whole fault history. Then, the symbol H# will

change to 0.

Figure 7-8. Fault history menu

READY

I/Oterm

READY

I/Oterm

READY

13:25:43

I/ O t er m

enter

Fault history 11 Output phase

5 ChargeSwitch

Operation days

Operation hours

PUSH to reset