User`s manual

96(110) CONTROL KEYPAD
7
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the frequency
converter. If selected active (default), the Start-up Wizard prompts the operator for the language and
application of his/her choice plus for the values for a set of parameters common to all applications as
well as for a set of application-dependent parameters.
Always accept the value with the Enter button, scroll options or change values with the Browser buttons (up
and down arrows).
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press the Menu
button right once to reach the edit mode. Use the Browser buttons to set value Yes and confirm the
selection with the Enter button. If you want to deactivate the function follow the same procedure and give
the parameter value No.
Figure 7-16. Activation of Start-up wizard
Multimonitoring items (P6.5.4)
Honeywell alpha-numeric keypad features a display where you can monitor even three actual values at the
same time (see chapter 7.3.1 and chapter Monitoring values in the manual of the application you are
using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to replace the
values monitored with other values. See below.
Figure 7-17. Enabling the change of multimonitoring items
7.3.6.6 Keypad settings
In the Keypad settings submenu under the System menu you can further customise your frequency
converter operator interface.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#) associated
with the keypad operation:
Figure 7-18. Keypad settings submenu
READY
I/Oterm
READY
I/Oterm
READY
I/Oterm
enter
Startup wizard Startup wizard
No No
Startup wizard
Yes
CANCEL
CONFIRM
READY
I/Oterm
READY
I/Oterm
enter
READY
I/Oterm
Multimon. items
ChangeEnable
Multimon. items Multimon. items
ChangeEnable ChangeDisable
P1
Î
P5
READY
I/Oterm
0.
READY
I/Oterm
Keypad settings
Default page