ASSEMBLY GUIDE

ALZO Video 32 Stony Hill Rd, Bethel, CT 06801 800-582-7009
[e-mail] http://alzovideo.com 1817 IS
ALZO TRANSFORMER DSLR RIG
ASSEMBLY GUIDE
Included in the kit:
A. TOP BAR
B. BASE BAR
C. HANDLES
D. SHOE MOUNT W/SCREWS
E. SHOE MOUNT W/THUMB SCREW
F. HEX HEAD CAP SCREWS
G. ALLEN WRANCH
Holding the top bar with the notches facing outward
insert one of the SHOE MOUNTS W/SCREWS into
an end hole and thread on a handle, rubber grip
down.
Maintaining the proper front back position of the
shoe mount, tighten up the handle. Repeat for the
second handle as shown on the right ->
Position the BASE BAR as shown below. Using the
supplied Allen wrench, install the 2 HEX HEAD CAP
SCREWS into the bottom of the handles. Tighten
firmly.
The SHOE MOUNT W/ THUMB SCREW can be
installed in any of the holes in the top bar. Supplied
washers are installed as shown
.
If you have additional questions regarding the application of this unit, we welcome you to contact us directly.
[e-mail] or 800-582-7009.