Installation Manual

ManualsBrandsAM alphamount ManualsElectronicsTilting TV Wall Mount Bracket for 32-82 Inch LED LCD OLED Flat Screen/Curved TVs-Low Profile TV Wall Mount Holds up to 132 lbs-Easy Install with All Hardware Included, Max VESA 600x400mm

1

2

3

4

5

6

7

8

9

9

3B-3

3B-1 3B-2

1/2 in. (13mm)

Socket Wrench

O

Position the wall plate at your

desired height, level the wall plate

and mark the pilot hole locations.

Drill 4 pilot holes using a 3/8 in.

(10mm) diameter drill bit. Make sure

the depth is not less than 2 3/4 in.

(70mm). Never drill into the mortar

between blocks.

Install wall plate using lag screws [G]

and washers [H] only until the washers

[H] are pulled ﬁrmly against the wall

plate. DO NOT over-tighten the lag

screws [G].

Use the hammer to knock

anchors [O] into the wall.

Be sure the anchors [O] are

seated ﬂush with the

concrete surface.

G

H

ø3/8 in. (10mm)

2 3/4 in. (70mm)