Installation Manual

Step 4 Adjust Tilt Angles of TV

Step 5 Hang TV to the Wall Plate [01 and 02]

5/16in. (8mm)

Wrench

(Not Included)

Note: Do not over-tighten

or over-loosen the bolts [S]

Loosen the four preassembled tilt tension bolts [S] on both brackets. Adjust

the hooks of the brackets to the desired angle, then tighten tilt tension bolts

with a wrench (not included) and a screwdriver (not included) to ﬁx the tilting

angle of the TV.

Note: The tilt angles of the hooks on the TV brackets must be the same

HEAVY! You may need

assistance with this step.

Top of TV

Bottom of TV

Loosen

Tighten