Manualshelf

Installation Manual

ManualsBrandsAM alphamount ManualsElectronicsTilting TV Wall Mount Bracket for 23-55 Inch LED LCD OLED Flat Screen/Curved TVs-Low Profile TV Wall Mount Holds up to 115lbs-Easy Install with All Hardware Included, Max VESA 400x400mm
12345678910
9
Step 2B Solid Concrete or Concrete Block Option
2B-1
2B-2
WARNING:
Ensure the wall plate is securely fastened to the wall before
continuing to the next step.
● Mount the wall plate [01] directly onto the concrete surface
● Anything covering the wall must not exceed 5/8 in. (16 mm)
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
Avoid potential personal injury or property damage! DO NOT over-tighten the
lag screws [A]. Tighten the lag screws [A] only until the washers [B] are pulled
firmly against the wall plate [01].
Position the wall plate at your
desired height, level the wall plate
and mark the pilot hole locations.
Drill 4 pilot holes using a 3/8 in.
(10mm) diameter drill bit. Make
sure the depth is not less than 2
1/6 in. (55mm). Never drill into
the mortar between blocks.
Wall
Anchor
C
ø3/8 in. (10mm)
2 1/6 in. (55mm)
01