Manualshelf

Installation Manual

ManualsBrandsAM alphamount ManualsElectronicsTV Mount, Tilt TV Wall Mount Bracket Low Profile for Most 32 to 84-inch Flat/Curved TVs, Mount up to VESA 800x400mm and 132lbs for 16 to 24-inch Studs, Easy to Install and Space Saving
3456789101112
To Hang TV onto Wall Plate
10
Step 4 Adjust Tilt Angles of TV
Step 5 Secure TV
5/16in. (8mm)
Wrench
(Not Included)
03
04
Top of TV
Bottom of TV
S
S
Slightly loosen the 2 preassembled tilt tension bolts [S] on both brackets.
Adjust the hooks of the brackets to the desired angle, then tighten tilt tension
bolts with a wrench (not included) and a screwdriver (not included) to fix the
tilting angle of the TV.
Loosen
Tighten
S
Note: The tilt angles of the
hooks on the TV brackets
must be the same
Note: Do not over-tighten or
over-loosen the bolts [S]
Ｈang the TV with brackets [03
and 04] onto the wall plate [01].
HEAVY! You may
need assistance
with this step.