Installation Manual

3A-3

3A-4

Step 3B Solid Concrete or Concrete Block Option

WARNING:

Ensure the wall plate is securely fastened to the wall before

continuing to the next step.

● Mount the wall plate [01] directly onto the concrete surface

● Anything covering the wall must not exceed 5/8 in. (16 mm)

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

● Never drill into the mortar between blocks

Avoid potential personal injury or property damage! DO NOT over-tighten the

lag screws [F]. Tighten the lag screws [F] only until the washers [G] are pulled

ﬁrmly against the wall plate [01].

Wall

Anchor

7/32 in. (ø5.5mm)

2 9/16 in. (65mm)

Drill 4 pilot holes using a

7/32 in. (5.5mm) diameter

drill bit. Make sure the depth

is not less than 2 9/16 in.

(65mm)

Install the wall plate [01]

using lag screws [F] and

washers [G]. Tighten the lag

screws [F] only until the

washers [G] are pulled ﬁrmly

against the wall plate [01] .

1/2 in. (13mm)

Socket Wrench

（Not Included）