User's Manual

▶ Equalizer (EQ) Setting Up
Select ( )Icon and move M(MENU) Key to right or left. Then
the 5 EQ modes will be shown as below.
Normal 󱈦 Classic 󱈦 Jazz 󱈦 Rock 󱈦 M-Bass 󱈦 USER
※ Please refer to page #24[USER EQ].
▶ Repeat Setting Up
Select ( )Icon and move M(MENU) Key to right or left. Then
the Repeat Setting up will be shown as below.
NOR(Normal) 󱈦 S1(Select One) 󱈦 All(ALL) 󱈦 RAN(Random)
※ Reference: In case of selecting ‘ALL’ and ‘RAN’ in the folder,
only files within that folder are played.
▶ Playback Speed Control
Select ( )Icon and move M(MENU) Key to right or left. Then
the Playback Speed Control Setting up will be controlled up to 6
steps.
(Normal[Nor], Fast[+I1], Slow4[-I4], Slow3[-I3], Slow2[-I2],
Slow1[-I1])
▶ Record / Encode Setting Up
Please set up MIC( ) and LINE( ) input as users conve-
nience using the function of MENU when encoding. Please press
M(MENU) Key and then select (0 0 0 0 0) Icon. When the voice
recording is desired, please move M(MENU) Key to right and left
and select MIC(0 0 0 0 0) Icon when the direct encoding is desired,
please select LINE(00000) Icon.
- 14 -- 13 -
Then, the selected section is repeated. To release the selected sec-
tion, move NAVIGATION Key(▶ l l ) to ‘A-B’ again.
※ Notice : 1. Repeat function can be applied for not only a file
but also several files, too.
※ Notice : 2. Repeat function is not available in case REPEAT
MODE is set up as a ‘RAN’(Random).
▶ HOLD
With this function, you can prevent HAN-250X from malfunction
occurred in the disordered place. When HOLD button is placed in
the ON Position (HOLD 󱈇ㅣ), all buttons on the player are not
working. However, POWER ON is available on the present status of
POWER OFF.
■
MENU Function
HAN-250X has a function of M(MENU) Key for user convenience.
Press M(MENU) Key, and icons for setting up functions will be dis-
played on LCD screen (EQ 󱈦 REPEAT 󱈦 PLAYBACK SPEED
CONTROL 󱈦 RECORD SELECTION(Voice/Line)). Each time
users press MENU Key, it moves EQ 󱈦 REPEAT 󱈦 PLAYBACK
SPEED CONTROL 󱈦 RECORD SELECTION in regular sequence.
If no movement occurs more than 5 seconds, it automatically returns
to the previous status. To set the each function, move M(MENU) Key
to right or left.
250 영문 메뉴얼 2004.3.30 2:43 PM 페이지13