User's Manual
Feature & O thersTo set the MODE Function
- 20 -
The player is made for users to set up the basic mode as user conve-
nience. Turn on the power and press MODE Button shortly to enter
MODE function Setting Up. To return, press MODE Button again.
(※ Reference : Entering MODE function is not available at the sta-
tus of FM RADIO. Please get out of FM RADIO
Mode once and then enter into MODE function.)
■ Major MODE function Setting Up
◉ Mode related to Memory Setting Up
- Memory Information : Memory use status
- Mode related to Memory Management Setting Up
Format Memory, Low Format, Erase All, Erase 1
◉ Mode related to Recording Setting Up
- MPEG Setting Up, Sample Frequency Setting Up, Bitrate Setting Up,
◉ Mode related to User Definition
- FM Band Select
- USER EQ
- Backlight Time
◉ Firmware Upgrading Mode Setting Up
Pictures for All MODE Functions
- 19 -
■ To record FM Radio
Users can record the desired FM Radio while listening as follows:
- Press REC(● ) Button while listening to start the recording and then
- Press REC(● ) Button again to stop the recording.
(※ Reference : 1. FM Radio recording files are saved from
RADIO001 in the ENCODING folder in sequence.
(※ Reference :2. Under FM Radio recording, files are recorded on
the basis of 96Kbps / MPEG2 Layer 3 regardless
of user’s setting mode.
■
To set up FM Band
It is function of worldwide FM frequency setting up. Please refer to
page #23 [FM Band Select].
(※ Reference : US Band is default mode at first)
[To Start Recording]
Setting up Band
※ US Band : USA, KOREA, CHINA and the other areas
(87.5 ~ 108 MHz)
※ JAPAN Band : JAPAN (76 ~ 90 MHz)
※ EU Band : EUROPE
[To Release Preset] [To Save By Manual]
250 영문 메뉴얼 2004.3.30 2:43 PM 페이지19