User's Manual
◉ Sample Freq Setting Up
Move M(MENU) Key to ‘VOL+’(to LEFT SIDE) / ‘VOL-’(to
RIGHT SIDE) to look for desired SAMPLE FREQUENCY and
then press NAVIGATION Key(▶ l l ) to select desired one among
Sample Frequencyies. The Sample Frequency depends on the
MPEG Mode as TABLE [1]:
◉ Bitrate Setting
Move M(MENU) Key to ‘VOL+’(to LEFT SIDE) / ‘VOL-’(to RIGHT
SIDE) for looking for desired Bitrate and then press NAVIGA-
TION Key(▶ l l ) to select desired one among Bitrate. The Bitrate
depends on the MPEG Mode as below.
TABLE [1]
▶ Mode related to User Definition
◉ FM Band Select
It is function of worldwide FM frequency setting up.
Move M(MENU) Key to ‘VOL+’(LEFT SIDE) / ‘VOL-’(RIGHT
SIDE) to look for desired FM Band and then press N A V I G A T I O N
Key (▶ l l ) to select desired one of among US Band JAPAN Band
EUROPE Band.
◉ USER EQ
Each song can be set through the USER EQ function which has 5
channels in the ranges of 20Hz ~ 20KHz. It can be adjustable in the
ranges of -5dB ~+5dB by user.
Please press M(MENU) Key to move to each of blocks. And move
M(MENU) Key to ‘VOL+’(LEFT SIDE) and ‘VOL-’(RIGHT
SIDE) to set the desired ‘dB’ within the block.
◉ Backlight Time
Users can set up desired Backlight time and turn off Backlight.
▶ Mode related to Firmware Upgrade
It is the function to upgrade the firmware. Please refer to page #30
[Firmware Upgrading].
- 24 -
B i t r a t e ( K b p s )
10 S teps in ra ng e of 32~ 224
15 S teps in rang e of 96~ 19 2
14 S teps in rang e of 112~ 256
15 S teps in rang e of 96~ 16 0
17 S te p s in ra ng e of 64~ 160
18 S te p s in ra ng e of 56~ 16 0
12 S te p s in ra ng e of 4.7~ 5.9
Sample Freq(KHz)
3 2
4 4 . 1
4 8
1 6
2 2 . 0 5
2 4
8
MPEG MODE
MPEG1 layer3
MPEG2 layer3
T V F
- 23 -
250 영문 메뉴얼 2004.3.30 2:43 PM 페이지23