User Manual

2
2 8
8
4
45
4
4
3
6
Product Features
1. Webcam Stand Length: with gooseneck arm can extend to the max approx.62cm /
- 24.5 inches.
2. The clamp max thickness 5cm(2.1inch) make it fit for the desk, table, sideboard, bed.
3. Standard 1/4" screw thread hold webcam suitable only. Before you place your order,
- please make sure your webcam comes with this standard 1/4'' screw hole. It is not
- suitable for the webcam without screw hold.
4. 360° swivel ball head can let your webcam rotating to get different best angles.
Note: Recommend to put the jaws flex clamp mount on a stable non-moving object, not
on something that vibrates, or it’s hard to maintain high quality picture effects. And not
for heavy camera and devices.
Specifications:
Assembly Instruction
Model: AMWS03
Color: Black
Main Material: Metal+plastic
Item Weight: Approx.400g
Item Length: Approx. 64cm / 25 inches
Max load weight 0.5 kg (1.1 lb)
1
2
3
4
5
6
7
8
9
Product Parts
Desk Clamp
Hollow Ring
Screw Thread
Card Slot
Clasp
Fixation Pin
Iron Tube
Swivel Head
Phone Bracket
1
2
3
4
5
6
7
8
9
Step 1: Put the hollow ring set in the swivel head .
Step 2: Fix in the card slot on the top of the swivel head .
Step 3: Knob tightly the hollow ring up to the bottom of the card slot .
Step 4: Insert clasp into the card slot , please try to find the best cut on
- both sides if you install it for the first time.
Step 5: Insert the 1/4 in. screw thread at the top of the card slot , and
- align the hole.
Step 6: Put the fixation pin in the hole and knob to tighen it
9