User`s manual

• Open the front door and install the HDDs in order from the top to the bottom. Please refer to the diagram.

• Twist the tool-less screw shut to seat the drive securely.

• Close the front door and the upper chassis cover, than fasten the tool-less screws on the back panel.

3.3 UNSTALLING HARD DISK DRIVE

Please unfasten the tool-less screw, and release the HDD from the 22-pin SATA connector by use the tool-less

screw, than remove the HDD one by one securely.

Ver. 091015 AES-S3504UE User’s Manual