User`s manual

4.7.2 REBUILDING A HOT SPARE DRIVE

1. If the there is a hot spare drive on drive 4, and the drive 2 has breakdown, the hot spare drive on drive

4 will replace the breakdown drive and rebuild automatically.To setup a new hot spare drive, please

remove the breakdown drive 2.

2. Turn off the power.

3. Replace a same or larger size hard disk drive.

4. Turn on the power.

5. The AES-S3504UE storage appliance will replace a hot spare drive on drive 2 automatically.

AES-S3504UE User’s Manual Ver. 091015