Installation guide

Installation clearances:
For each arrangement, consider allowing more space for ease of
installation and servicing; spacing for companion appliances and
clearances for walls, doors, and floor moldings. Space must be
large enough to allow door to fully open. Add spacing on all sides
of dryer to reduce noise transfer. If a closet door or Iouvered door
is installed, top and bottom air openings in door are required.
Dryer Dimensions
Front View:
_686 mm_
(27)
1095 mm
(431/8"}
_578 mm_
(22 3/4"}
489 mm
(19 1/o"}
Side View:
m
_743 rnm_
356 mm _- (29 1/4 ) r
(14")
Side View of Side Swing Door:
{101/4")
_578 mm_
(22 3/4")
_743 mm_
(29 1/4")
?-
260 mm4_
(101/4")
108 mm
(41/4'')
108 mm
(41/4 ")
Back View:
t
972 mm
{381/4'')
279 mm
,", IT
t
i
359 mm
(141/8"}
100 mm
(4"}
Recessed Area and Closet Installation
This dryer may be installed in a recessed area or closet. If
a closet door or Iouvered door is installed, the minimum
unobstructed air openings in the top and bottom of the door are
required. For recessed area and closet installations, minimum
clearances can be found on the serial tag on the dryer.
356 mm _----_1
(14"} max [........ !.....
r- ........ j .....
102 mm I_%'.....
(4"} \ ""%.
f (1")
mm
"}
J
,..25mm
(1"}
76
(:
76
5 ram1
[] Dimensions shown are minimum spacings required. Consider
allowing more space for ease of installation, servicing, and
compliance with local codes and ordinances.
[] Additional spacing for companion appliances and clearances
for walls, doors, and floor moldings should also be
considered. Add spacing of 25 mm (1") on all sides of dryer
to reduce noise transfer.
[] This dryer must not be installed behind a Iockable door,
a sliding door or a door with a hinge on the opposite side
to that of the dryer.
[] The dryer must be exhausted outdoors.
[] No other fuel-burning appliance may be installed in the same
closet as the dryer.