Use and Care Manual

Connect disposer to mounting assembly with

Lift & Latch® and Complete Installation

Rotate disposer to align with plumbing

and reconnect plumbing (and dishwasher

reconnection if used.)

NOTICE

Property Damage: Risk of long/short term water leakage if not properly assembled.

You may need to trim tube for proper t. To reduce the potential of leaking, the drain

line must be properly pitched (not less than 1/4” of pitch per foot of run) from the

disposer to the drain connection, with the drain connection being lower than the

disposer discharge. Failure to do so could lead to premature corrosion or leaking due

to standing water left in the disposer.

Insert stopper (A) into sink opening, ll

sink with water, remove stopper (A) to

drain, then look under sink for leaking

water. Reconnect electrical power at

fuse box or circuit breaker box.