Dimension Guide

Bottom Mount Refrigerator
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
ABB1924BR ABB2224BR
Electrical: A 115-volt, 60-Hz, AC-only,
15- or 20-amp fused, grounded
electrical supply is required. It is
recommended that a separate circuit
serving only your refrigerator be
provided. Use an outlet that cannot be
turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of
installation, cleaning, or removing a
light bulb, turn the control (Thermostat,
Refrigerator or Freezer Control
depending on the model) to OFF and
then disconnect the refrigerator from
the electrical source. When you are
finished, reconnect the refrigerator to
the electrical source and reset the
control (Thermostat, Refrigerator or
Freezer Control depending on the
model) to the desired setting. See
“Using the Controls.”
Water: A cold water supply with water
pressure between 35 and 120 psi (241
and 827 kPa) is required to operate ice
maker and water dispenser. If you have
questions about your water pressure,
call a licensed, qualified plumber.
IMPORTANT: The pressure of the
water coming out of a reverse osmosis
system going to the water inlet valve of
the refrigerator needs to be between 35
and 120 psi (241 and 827 kPa).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration system
is connected to your cold water supply,
the water pressure to the reverse
osmosis system needs to be a
minimum of 40 to 60 psi (276 to
414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10366212A
3/14/14
¹⁄₂" (1.25 cm)
2¹⁄₂" (6.3 cm)
To ensure proper ventilation for your refrigerator, allow for a
1
⁄2" (1.25 cm) space on
each side and at the top. Allow at least 1" (2.54 cm) between back of cabinet and the
wall. If your refrigerator has an ice maker, allow extra space at the back for the water
line connections.
If you are installing your refrigerator next to a fixed wall, leave 2
1
⁄2" (6.3 cm)
minimum on the hinge side (some models require more) to allow for the door to
swing open.
NOTE: This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator near a heat source,
such as an oven or radiator.
Model
Number Model Size
Height -
Overall
“A”
Height -
Top of
Cabinet
“B”
Depth -
Doors
Open 90°
“C”
Depth -
Drawer
Open
“D”
Depth -
With
Handles
“E”
Depth -
Without
Handles
“F”
Depth -
Cabinet
Only
“G”
Width -
Cabinet
“H”
Width -
Door Open
90°
“I”
ABB1924BR 18.5 cu.ft.
66⁷⁄₈"
(169.9 cm)
65
1
⁄2"
(166.4 cm)
59"
(149.9 cm)
50³⁄₄"
(128.9 cm)
33
3
⁄8"
(84.8 cm)
30
7
⁄8"
(78.4 cm)
28
1
⁄8"
(71.4 cm)
29
5
⁄8"
(75.2 cm)
32¹⁄₈"
(81.6 cm)
ABB2224BR 21.9 cu.ft.
69
15
⁄16"
(177.6 cm)
68
1
⁄2"
(174.0 cm)
62"
(157.5 cm)
50³⁄₄"
(128.9 cm)
33
3
⁄8"
(84.8 cm)
30
7
⁄8"
(78.4 cm)
28
1
⁄8"
(71.4 cm)
32
5
⁄8"
(82.9 cm)
35¹⁄₄"
(89.5 cm)
4
1
A
overall
B
top of
cabinet
H
not incl.
handle
F
incl.
handle
E
D
cabinet
G
90˚
C
I