Operating Guide

ManualsBrandsAmana ManualsHeating, Ventilation, and Air Conditioning17,600 BTU R-410A Window Air Conditioner with 3.5 kW Electric Heat and Remote

Operating Controls

Operating your air conditioner properly helps you to obtain the

best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

• If you turn off the air conditioner, wait at least 3 minutes

before turning it back on. This prevents the air condi-

tioner from blowing a fuse or tripping a circuit breaker.

• Do not try to operate your air conditioner in the cooling

mode when outside temperature is below 61°F (16°C).

Do not try to operate your air conditioner in the heating

mode when outside temperature is over 86°F (30°C).

NOTES:

1. NOTE: Factory default setting is for °F. To convert to

°C, press the INCREASE

S / DECREASE

T buttons

simultaneously for approximately 5 seconds. To return

to °F, repeat the procedure.

2. In the event of a power failure, your air conditioner will

operate at the previous settings when the power is

restored.

Controls

n Power Pad (Button)

Turns air conditioner on and off. When turned on, the

display will show the room temperature.

o Display

Shows the Set temperature when in HEAT, COOL or

ENERGY SAVER mode; shows the time remaining on

the Delay Timer; shows the room temperature when in

Fan Only mode. The SET light will turn on while set-

ting.

p Temp Increase S / Decrease T Pads

Use to set temperature when in HEAT (on some mod-

els), COOL or ENERGY SAVER mode. The SET light

will turn on while setting.

q Delay Timer Increase S (+) / Decrease T(-) Pads

Each touch of the INCREASE

S / DECREASE

T pads

on the unit or the INCREASE (+) / DECREASE (-) pads

on the remote control will set the delay time when using

the TIMER 0.5-24 hr.

The SET light will turn on while setting.

r Fan Speed Pads

Use to set the fan speed to LOW, MED, HIGH or AUTO,

on the unit.

NOTE: On the remote control, use the fan speed IN-

CREASE (+) / DECREASE (-) pads to set the fan speeds

to LOW, MED or HIGH. Use the AUTO pad to turn Auto

fan on.

s Mode Pad

Use to set the air conditioner to COOL, ENERGY SAVER,

FAN ONLY or HEAT (on some models) mode.

t Timer Pads

TIMER ON - When the air conditioner is off, it can be set

to automatically come on in 0.5 (1/2 hr.) to 24 hours at

its previous mode and fan settings.

TIMER OFF - When the air conditioner is on, it can be

set to automatically turn off in 0.5 (1/2 hr.) to 24 hours.

Lights next to the touch pads on the air conditioner control

panel indicate the selected settings.

Timer 0.5-24 hr

Delay timer

Decrease



Mode select







Fan speed

Decrease







Tem pe ra t ur e

set Increase

and Decrease





TIMER

The display shows the Set temperature

when in HEAT, COOL or ENERGY SAVER

mode. It also shows the time remaining on

the Delay timer and the room temperature

when in Fan Only mode.

Summary of content (6 pages)

PAGE 1
Operating Controls Operating your air conditioner properly helps you to obtain the best possible results. Controls This section explains proper air conditioner operation. n IMPORTANT: • • Power Pad (Button) Turns air conditioner on and off. When turned on, the display will show the room temperature. If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
PAGE 2
How to set: Cooling Descriptions Press the TIMER 0.5-24 hr pad on the unit or the TIMER pad on the remote control. Each touch of the INCREASE S / DECREASE T pads on the unit or the INCREASE (+) / DECREASE (-) pads on the remote control will set the timer in 0.5 (1/2 hr.) or 1-hour intervals. (The delay timer can be set in 0.5 (1/2 hr.) increments if programmed for under 10 hours, but if the delay timer is set for above 10 hours, the timer will be set in 1-hour increments.
PAGE 3
BEFORE CALLING SERVICE WARNING The following is a list of problems that are sometimes encountered when using a room air conditioner. Possible cause and suggested remedies are given for each problem. If the problem cannot be fixed using the suggested remedies, see WHEN SERVICE IS REQUIRED section. PROBLEM UNIT WILL NOT RUN POSSIBLE CAUSE SUGGESTED REMEDY No power to unit Push reset button on power cord. Set Fan Control to position other than OFF. Make sure plug is firmly seated in outlet.
PAGE 4
When Service Is Required Any Questions? Your room air conditioner dealer can give you the name of your nearest Authorized Service Center. Help them give you prompt service by providing: Most questions can be answered by your local dealer. If you have other matters that cannot be resolved locally, or you need additional information regarding other heating and cooling products offered by us - please call: • • • An accurate description of problem.
PAGE 5
19 Part No. PW-342C 12/2010 _________________________________ Date of Purchase _________________________________ This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
PAGE 6
11 20 Part No.