Installation guide

Do not over-tighten the hold down adjusting screw. Damage
to the glass cooktop will occur if excessive pressure is used.
Secure the unit to the countertop using only the hold down
bracket and adjusting screw provided, do not use any other
means to secure the unit.
Do not use the junction box for additional wiring connections.
Do not remove the center terminal ground wire from the unit.
Turn off power supply when making electrical connections.
Cookware retention devices must be installed and used
properly to minimize the potential for spills and burns.
Extreme caution should be exercised when cooking in a
moving boat or vehicle.
foam tape
adjusting screws
Model AEZ8590
(240 Volt, 13.3 Amps)
__Red
Ground
Black
Model AEZ8581
(120 Volt, 20 Amps)
--White/Neutral
--Ground
-- Black
lVlaytag 403 West Fourth Street North P, O, Box 39 Newton, Iowa 50208