Use & care guide

ASSEMBLY INSTRUCTIONS

Step 10: Assemble the Side Valve

1. Using a Phillips screwdriver, remove the 2 screws from the side burner valve assembly.

2. Push the valve stem out through the opening in the front of the side burner shelf, lining up the

threaded holes in the side burner valve assembly with the openings on the side burner shelf.

3. Position the side burner bezel into place, with the OFF position pointing up, making sure to

line up the holes.

4. Attach side burner bezel to side burner assembly face with screws removed in step 1.

5. Press knob onto valve assembly stem with OFF position pointing up..

A. Side burner valve assembly

B. Large bezel

C. Phillips pan head screw

D. Control knob