Manual

5
Freezer Leveling and Door Closing
Style 1
1. Locate the 2 front leveling legs taped among the packing
materials.
2. Screw these legs into the front holes on the bottom of the
freezer. The back of the freezer rests on 2 xed supports.
3. Adjust the front legs enough to lift the cabinet up off the oor.
4. Place a leveling tool on top of the freezer rst side to side,
then front to back. Turn leg counterclockwise to raise a
corner. Turn leg clockwise to lower a corner.
5. Repeat Step 4 until freezer is level.
6. After freezer is fully loaded with food, recheck with level as in
Step 4.
Style 2
Your freezer has 2 front adjustable legs, one on each side. The
back of the freezer rests on 2 xed rollers. The base grille covers
the adjustable brake feet and roller assemblies located at the
bottom of the freezer below the freezer door. Before making any
adjustments, remove the base grille and move the freezer to its
nal location.
Tools Needed: 1/4" hex driver, Phillips head screwdriver
1. Remove base grille screws. Grasp the grille rmly and pull it
toward you. Open the freezer door to access the brake feet.
A
2
A
B
C
1
3
A
B
B
C
A
B
A
B
Bottom Hinge
Door Removal &
Replacement
A. Top Hinge Cover
B. 5/16" Hex-Head Hinge
Screws
C. Top Hinge
A. Grommet
B. Handle
C. Setscrews
A. Hinge Pin
B. 3/8" Hex-Head Hinge
Screws
A. Cabinet Hinge Hole Plugs
A. Hinge Pin
B. 3/8" Hex-Head Hinge
Screws
Top Hinge
Door Swing Reversal and Handle Removal (optional)
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.