Installation Instructions

INSTALLATION INSTRUCTIONS FOR 230/208
CIRCUIT BREAKER KITS
A3491403July 1999
Due to policy of continual product improvements, the right is reserved to change specifications and design without notice.
Description
The circuit breaker kit provides POWER ON/OFF and
current overprotection function at the unit. The circuit
breaker kit contains the appropriate circuit breaker, re-
placement access cover for the high voltage section of the
subbase, mounting bracket and clips, and required hard-
ware. Select circuit breaker kits according to unit amper-
age.
WARNING
Disconnect electrical power source before
wiring the subbase. Failure to do so may
result in injury or death from electrical
shock. The unit “OFF” switch does not
disconnect all power to the unit.
CAUTION
Use copper conductors only for electrical
connections. The use of other types of
conductors may result in galvanic
corrosion, overheating and resultant
equipment failure.
WARNING
All wiring must comply with applicable
local and national codes. Type and location
of fused disconnect switch(es) must
comply with all applicable codes.
!
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
The installation and servicing of this equipment
should be performed by qualified, experienced
technicians.