Owner`s manual
24
Equipment Basics Basics
Release Date: 0813 This manual is the property of Burger King Corporation and may be used only in a manner and by persons approved by the Company.
Change DR PEPPER
®
BIBs (Without Threaded
Connectors)
Follow the procedures listed above, except:
1. Remove the connector by snapping the probe outward
(arrow should line up)
2. Lift the connector up and out of the bag spout
3. Reconnect the connector by snapping it downward over
the inner groove in the bag spout
4. Push the probe forward until the “IN” arrows line up
— When the “IN” arrows line up, you will hear a click
5. Place the BIBs on the rack, tilted (about 15°) so they drain
forward
Equipment
Checks
Check Nozzles/Diffusers
Be sure all valves have nozzles and diffusers
Wash, rinse, sanitize and air dry nozzles and diffusers
daily
Be sure valve cap has no mildew buildup underneath it
Check CO
2
Supply and Pressure Settings
Refer to owner’s manual for checking and setting
instructions
Check that CO
2
cylinders or bulk tanks are stored at room
temperature (in vented area, positioned upright, NEVER
on their side) and chained/secured
Store BIB boxes on a
shelf -— maximum 5 high
and at least 6 in. (15 cm.)
off the floor.
BIB boxes connected to a
changeover valve must be
placed side by side, not
one on top of the other.
Check Water Filter
Water filter(s) must be changed as indicated by the pressure
drop on gauge or every 6 months (except Selecto Scientific
Filter, which should only be changed when the pressure drop
on gauge indicates changing, or after 1 year).
The date when the filter(s) cartridge is changed must be
clearly visible on the filter casing
It may be necessary to
change water filter more
frequently than every 6
months.
Use BKC-approved filters
only, with cartridge less
than 6 months old.
Water to Syrup Ratios:
COKE
®
5.5:1
SPRITE
®
5.7:1
DIET COKE
®
8.1:1
Other sugar-based 4.75:1
Other diet products 5.25:1
Primary
Regulator
115 – 120 psi Bulk or cylinder
Secondary
Regulator
70 psi BIB pumps