Master Catalog

MC-DPTAC www.amana-ptac.com 5
enTerPrise — mulTiPle wireless conTrollers
Central Monitoring and
Control of Multiple properties
> Data Warehousing
> Savings Analysis
> Email Reporting
> Virtual Metering
> Load Shedding
weB-Based, real-Time moniToring
amana® Brand digismarT™ conTroller:
All of the PTACs in the building can be managed through a single interface on a PC.
FEATURES INCLUDE: Full unit details for every PTAC, visible from the front desk or home ofce, automatic emails for PTAC
maintenance, ability to change all settings on the unit, and enhanced diagnostics. Monitor up to 170 PTACs, WIRELESSLY, with one
controller. Additional controllers can expand the network for additional rooms/properties.
> System Verication
> Global Setbacks
> EMS Conguration
> Site Statistics
> Battery Notices
> Email Reporting
> Unit Health
> Unit Code Alerts
Temp Limiting – Each PTAC
can be congured with a heat-
ing and cooling temperature
set-point limit.
Setbacks – Once a room is declared unoccupied by the occupancy sensor, the PTAC progresses through three different temperature
setbacks, congured as three degree and time pairs (An example conguration is listed below).
1st: 2°, 30 mins – Setback the temp 2 degrees after 30 minutes
2nd: 4°, 1 hr – Setback the temp 2 more degrees after 30 more minutes
3rd: 8°, 3 hrs – Setback the temp 4 more degrees after 2 more hours
Unrented Set-Points – By integrating with your property's Front Desk System, the PTACs will adjust to specic set-points when no
longer identied as rented in the system.