Packaged Terminal Air Conditioners and Heat Pumps with our DigiSmart® Control Board & EMS PTAC Specifications and Accessories Catalog Assembled in the USA for 30 years: Units are 100% run-tested and triple-tested for leakage. • First-Year Warranty: Parts & Labor • Second through Fifth Year: Parts & Labor on certain sealed system components • Second through Fifth Year: on certain functional parts only * Complete warranty details available from your local dealer or at www.amana-ptac.com. MC-DPTAC www.
Standard Features • Energy Efficiencies: With EERs up to 11.7 and COPs up to 3.4, our unit’s high efficiencies may qualify you for many of the rebates offered by electrical power companies. • Quiet Operation: Our PTAC has been redesigned to be the quietest PTAC we’ve ever built. The unit’s state-of-the-art design and construction provide a quiet environment, allowing guests to enjoy peaceful, sleep-filled nights.
Standard Features (cont.) • Condensate Dispersion System: Our condensate dispersion system removes condensate from indoor cooling operation by throwing water directly on to the outdoor coil for rapid evaporation and increased cooling efficiencies. The slinger ring on the new, enhanced fan draws water up and into the fan blades. This water is then atomized and evaporated into the atmosphere through the condenser.
brings together our best PTAC ever with our best Energy Management Software and now integration with Property Management and Front Desk Management Software. Reduce PTAC energy consumption by 35% OR MORE* through the power of the in-unit Energy Management System, programmable temperature set-back and limits combined. Reduce PTAC maintenance cost through our automated maintenance notification system.
Enterprise — Multiple Wireless Controllers Central Monitoring and Control of Multiple Properties > Data Warehousing > Savings Analysis > Email Reporting > Virtual Metering > Load Shedding Web-Based, Real-Time Monitoring Amana® Brand DigiSmart™ Controller: All of the PTACs in the building can be managed through a single interface on a PC.
Nomenclature PTC 07 3 G 1,2,3 4 5 6 35 AXXX AA 7,8,9 10,11,12,13 14 Basic Model Type PTC Standard Cooler PTAC PTH Standard Heat Pump PTHP DRY Dehumid Cooler PTAC Engineering Major & Minor Revisions A C D F H P Q R V X W Cooling Capacity 07 7000 BTU/h 60 Hz 09 9000 BTU/h 60 Hz 10 10000 BTU/h 50 Hz 12 12000 BTU/h 50 or 60 Hz 15 14000 BTU/h 60 Hz Rated Voltage 2 115V, 60 Hz, 1 Ph 3 230/208V, 6
Product Specifications: PTC Models — Cooling/Electric Heat 230/208 Volts Model ⁶, ⁸, ⁹ Voltage ³ Capacity (BTU/h) Amps ¹⁰ Watts ¹⁰ EER PTC 073G***XXX PTC 093G***XXX PTC 123G***XXX PTC 153G***XXX 230 / 208 7,700 3.5 670/660 11.5 230 / 208 9,000 4.1 805/785 11.2/11.5 230 / 208 11,700 / 11,500 5.6 1135/1105 10.3/10.4 230 / 208 15,000 / 14,700 7.0 1500/1470 10.0/10.0 Unit without Electric Heater Min.
Product Specifications: PTH Models — Cooling/Heat Pump/Electric Heat PTH073G **AXXX PTH093G **AXXX PTH123G **AXXX PTH153G **AXXX PTH074G **AXXX PTH094G **AXXX PTH124G **AXXX PTH154G **AXXX 230 / 208 230 / 208 230 / 208 230 / 208 265 265 265 265 7,600 9,000 12,000 14,200 7,600 9,100 12,000 14,200 Amps ¹⁰ 3.9 4.2 5.8 7.0 3.1 3.7 5.0 6.1 Watts ¹⁰ 650 785 1,125 / 1,100 1,465 / 1,445 650 790 1,120 1,465 EER 11.7 11.5 10.7 9.7 11.7 11.5 10.7 9.7 4.7 5.1 7.1 8.
Product Specifications: PTC / PTH Models — Electric Heat Performance (Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Configuration) Nominal Heating (BTU/h) Electric Heater Size (kW) No. of Stages 230/208V 2.5 1 230/208V 3.5 1 12,000 9,900 -- 3,570 / 2,935 15.5 / 14.1 19.5 20 6-20 P 230/208V 5 1 17,100 14,000 -- 5,070 / 4,160 22.1 / 20.0 27.6 30 6-30 P 265V 2.5 1 -- -- 8,500 2,570 9.7 12.2 15 7-20 P 265V 3.
Accessories Standard Depth Sleeves WS900E Standard PTAC sleeve WS900SC Seacoast triple protected WS900DINTERNAL Internal drain only for window-wall installations (DK900D sold separately) 161/16" Wall Sleeves All our wall sleeves have industry standard dimensions of 42” wide x 16⅟₁₆” high. All Stonewood Beige G-90 metal wall sleeves are thermally insulated and include a weather board for use during construction. The WS900D, SC and INTERNAL 14⅛” depth is the industry standard.
Accessories (cont.) Power Disconnect Switch The PSHW**A power disconnect switch can be used for 265-volt or 230/208-volt physical disconnect, where required by local codes. The switch is rated at 30amp capacity. The switch is for use with and Amana® brand standard sub-bases or PTPWHWK4 Hard Wire Kit. Fuse Holder Kit Cartridge-style fuses can be installed in the fuse holder for use in the sub-base or chassis. Available in 15, 20 and 30 amp (included on 265-volt unit).
Accessories (cont.) Security Key Locks In conjunction with the tamper-resistant front, the installation of Amana® brand security key locks prevents tampering of the controls used to set temperature, heating and cooling functions. UL approved for institutional use only. Power Door Kit Vent door will automatically open when unit fan is on.
Accessories (cont.) Wired Energy Management Control Includes PIR occupancy sensor power from the DigiSmart control and door switch; cannot be used with a remote wired thermostat. Wall Sleeve Extension Adapter Kits Room-side extension kits to increase the depth of the existing sleeve to allow for an industry-standard PTAC to be installed.
Unit with Accessory Wall Sleeve and Sub-base Accessory Top View 42" 40" 6 - 1 / 8" 24 - 5 / 16" 1" 9 - 9 / 16" Location of external drain holes on bottom flange of Wall Sleeve Air Flow Air Flow Air Flow Control Door Air Discharge Grille 3 1" 3" Clearance to side walls " Front View 58” LCDI CORD SET — 230V/208V UNIT* 42" LEFT R I GHT 16-1/16" 2-5/8" Right View AIR DISCHARGE GRILLE IS REVERSIBLE TO PROVIDE EITHER 15° OR 40° DISCHARGE ANGLE 3-1/4" MIN 7/8" STAMPED GRILLE 21-1/2" 14-1/8" W
Framing for Accessory Wall Sleeve (WS9XX) Alternative Fastening Method (Field Supplied) Wood Screw Toggle Bolt Expansion Anchor Bolt Mounting Holes (Drilled by Installer) Plastic Anchor Screws Wall Sleeve must extend a minimum of ¼” beyond outside wall to allow for proper caulking.
Packaged Terminal Air Conditioners and Heat Pumps with Control Board 7-Button Control Pad • One-Touch Activation • Total Fan Control • Easy-to-Read Display Assembled in the USA for 30 years: Units are 100% run-tested and triple-tested for leakage. First-Year Warranty: Parts & Labor Second through Fifth Year: Parts & Labor on certain sealed system components Second through Fifth Year: on certain functional parts only * Complete warranty details available from your local dealer or at www.amana-ptac.com.