PACKAGE TERMINAL AIR CONDITIONER (PTAC) AND HEAT PUMP Specifications and Accessories Catalog Wise Decision. It’s an Amana® brand. Amana is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX, USA. All rights reserved.
DIGISMART® A Combination of Energy Management and PTAC Performance Amana® brand DigiSmart® brings together our best PTAC with our best energy management software that now integrates with optional property management and front desk management software. Reduce PTAC energy consumption up to 35% OR MORE* through the power of the in-unit energy management system, programmable temperature set-back, and temperature limiting combined.
www.amana-ptac.
Standard Features ■■ ■■ Energy Efficiencies: With EERs up to 12.0 and COPs up to 3.4, our unit’s high efficiencies may qualify you for many of the rebates offered by electrical power companies. Quiet Operation: Our PTAC has been redesigned to be the quietest PTAC we’ve ever built. The unit’s stateof-the-art design and construction provide a quiet environment, allowing guests to enjoy peaceful, sleep-filled nights.
■■ ■■ ■■ ■■ ■■ ■■ ■■ Room Freeze Protection: When the unit senses temperatures of 40°F or below, the unit activates the fan motor and either the electric resistance heater or the hydronic heater. Easy-to-use Controls: No complex controls to confuse your guests and create phone calls for your manager. Controls are easy to read, understand, and activate.
Nomenclature PTC 07 3 G 35 AXXX AA 1,2,3 4,5 6 7 8,9 10,11,12,13 14,15 Basic Model Type Engineering PTC Standard Cooler PTAC Major & Minor Revisions PTH Standard Heat Pump PTHP DRY Dehumid Cooler PTAC PMC DigiAIR Cooler PTAC A Standard Model PMH DigiAIR Heat Pump PTAC C Corrosion Protection (Seacoast) Features Code * Nominal Cooling Capacity D Power Door F Fuse Holder (230/208 On
Product Specifications: PTC Models — Cooling/Electric Heat 230/208 Volts Model 6, 8, 9 Voltage ³ Capacity (BTU/h) Amps ¹⁰ Watts ¹⁰ EER PTC 073G***XXX 230 / 208 7,700 / 7,700 3.5 / 3.5 658 / 658 11.7 / 11.7 PTC 093G***XXX 230 / 208 9,000 / 9,000 4.1 / 4.1 796 / 783 11.3 / 11.5 PTC 123G***XXX 230 / 208 12,000 / 11,700 5.6 / 5.6 1,114 / 1,085 10.4 / 10.5 PTC 153G***XXX 230 / 208 15,000 / 14,700 7.0 / 7.0 1,500 / 1,470 10.0 / 10.0 PTC 173G***XXX 230 / 208 16,400 / 16,200 8.4 1,740 / 1,720 9.4 4.
Product Specifications: PTH Models — Cooling/Heat Pump/Electric Heat Model 1, 6, 8, 9 PTH073G **AXXX PTH093G **AXXX PTH123G **AXXX PTH153G **AXXX PTH074G **AXXX PTH094G **AXXX PTH124G **AXXX PTH154G **AXXX Voltage ¹, ³ 230 / 208 230 / 208 230 / 208 230 / 208 265 265 265 265 7,600 / 7,600 9,000 / 9,000 12,000 / 12,000 14,700 / 14,700 7,600 9,100 12,000 14,600 5.8 / 5.8 7.0 / 7.0 Capacity (BTU/h) Amps ¹⁰ 3.9 / 3.9 4.2 / 4.2 Watts ¹⁰ 650 / 633 750 / 750 3.1 3.7 5.0 6.
Product Specifications: PTC 115-Volt Models — Cooling/Hydronic Heat or No-Heat Models Model 5, 6 Voltage 2 Capacity (BTU/h) PTC 072G**XXX PTC 092G**XXX 115 7000 115 9000 Amps 6.9 8.3 Watts 585 795 EER 11.9 11.3 Min. Circuit Amps 1, 3 8.3 290 264 310 282 10.1 290 264 310 282 Ventilated Air, (Fan Only)* 65* 65* Dehumidification (Pints/Hr.) 1.7 2.3 CFM (Cool/Wet Coil) CFM (Dry Coil) High Low High Low Net Weight (lbs.) 98 102 Ship Weight (lbs.
Product Specifications: PTC / PTH Models — Electric Heat Performance (Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Configuration) Voltage Electric Heater Size (kW) No. of Stages 230/208V 1.5 / 1.3 1 230/208V 2.5 / 2.1 1 8,500 6,800 -- 2,570 / 2,115 11.2 / 10.1 14.1 15 6-15 P 230/208V 3.5 / 3.0 1 12,000 9,900 -- 3,570 / 2,935 15.5 / 14.1 19.
Accessories Standard-Depth Sleeves WS900E-GS Heavy Sound Isolation Insulation Sleeve WS900E WS900SC WS900DINTERNAL Standard PTAC sleeve Seacoast triple protected Internal drain only for window-wall installations (DK900D sold separately) Outdoor Grilles Available in stamped-aluminum or architecturally louvered for application with an Amana brand WS900E wall sleeve. AGK: Extruded aluminum architectural grille available with anodized aluminum finish or a baked-on paint finish for durability.
Accessories (cont.) Sub-base Kit The fully skirted sub-base conceals wiring while providing strong support, if needed. Plug-in receptacle and field-wiring access speeds installation. Electrical accessories, such as fuse holders, circuit breakers and disconnect switches, meet N.E.C. requirements.
Accessories (cont.) Duct Extension Kit Extends air distribution to an adjoining room. Consists of a main duct for the room of origin and an extension duct to reach the adjoining room and terminal duct. PTDK01A allows for the “B” series unit to work with the “A” series duct kits. MDK02B MDK01E EDK02B Main Duct – R-22 Main Duct – R-410A 42" Extension Duct Power Vent Kit Installation of Power Vent increases CFM up to approximately 95. Vent door will automatically close when unit fan is off.
Accessories (cont.) Thermostats The following thermostats offer remote control. Any thermostat other than those listed must be submitted to Goodman Company, L.P., for approval prior to use. Model # Heat Stages Cool Stages Fan Speed # of Wires Temp Required Limiting Backlit Display Type Shape & Orientation Connection 2246002 1 1 1 5 No Yes Digital Manual Rect./Horiz. Wired 2246003 2 2 2 7 Yes Yes Digital Manual Rect./Horiz.
Accessories (cont.) Power Door Kit Vent door will automatically open when unit fan is on. Factory Installed Feature Code - D Hydronic Valves Water and steam valves are available for use with the HWK03 (water) and HVK03 (steam) heat kits.
Unit with Accessory Wall Sleeve and Sub-base Accessory Top View 42" 40" 6 - 1/ 8" 1" 9 - 9 / 16" 24 - 5 /16" Location of external drain holes on bottom flange of Wall Sleeve Air Flow 1" Air Flow Air Flow Control Door Air Discharge Grille 3" 3" Clearance to side walls Right View Air discharge grille is reversible to provide either 15° or 40° discharge angle ⅞" Stamped Grille 21½" 14⅛" Wall Sleeve 7⅜" Front View 58" LCDI CORD SET — 230V/208V UNIT* 42" 1⅜" Arch Grille LEFT 15° R I GHT 16-1/1
Framing for Accessory Wall Sleeve (WS9XX) Fastening Wall Sleeve When installed in an opening, the Wall Sleeve must be horizontally level (side-to-side) and pitched ¼ bubble to the outside. Alternative Fastening Method (Field Supplied) (NOTE: To ensure unit’s maximum efficiency, DO NOT over- or under-pitch.) Installation Notes 1.
Notes
Wise Decision. It’s an Amana® brand. ■■ ■■ ■■ Quiet two-fan motor system Energy-efficient performance DigiSmart® wireless controls on select models Our continuing commitment to quality products may mean a change in specifications without notice. © 2015 Goodman Company, L.P. Amana is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX, USA. All rights reserved.
A legacy of comfort The impeccable reputation of an American original Amana heating and cooling systems are a part of the enduring legacy of one of America’s most recognized and respected brands. Originating eight decades ago in Amana, Iowa, the brand is synonymous with long-lasting, premium-quality products — from home appliances to heating and air conditioning equipment. Chances are, you and generations before you have enjoyed the dependable performance and longevity the Amana brand continues to deliver.