Use & care guide

13
Pausing or Restarting
1. To pause the washer at any time, press START/PAUSE.
2. To continue the cycle, press and hold START/PAUSE (for
approximately 3 seconds).
Changing Cycles and Options
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START/
PAUSE is pressed.
To cancel a cycle
1. Press POWER.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If
the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change an Option after the cycle has started
1. Press START/PAUSE once.
2. Pr
ess the desired OPTION. If the option is not available, the
machine will beep.
3. Pr
ess and hold START/PAUSE (for approximately 3 seconds)
to continue the cycle.
To drain the washer manually
1. Press START/PAUSE.
2. Select DRAIN & SPIN
.
3. Press and hold START/PAUSE (for approximately 3 seconds)
to begin the drain.
4. Wh
en the spin is complete, the door unlocks. Items can be
removed from the washer.
Status Lights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle.
Adding items
You can add items to the washer after the wash cycle has started,
if the Add Garment status light is illuminated. All cycles have this
feature except Rinse & Spin, Drain & Spin, and Clean Washer with
AFFRESH™ cycle.
To add items
1. Pr
ess START/PAUSE. The washer door unlocks, and items
can be added.
2. T
o continue the cycle, close the door and press and hold
START/PAUSE (for approximately 3 seconds).
NOTE:
To add garments after the Add Garment period is over, the
wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Complete
The Complete light comes on after the cycle is done. The light will
stay on until door is opened or Power button pressed.
Cycles
Wash Cycles
Choose Wash Cycles by pushing the Cycle selector button to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels.
■ Each cycle has a preset cycle time, temperature, spin speed,
and may have preset Options. The preset settings provide the
recommended fabric care for the selected cycle.
■ The preset settings can be changed anytime before START/
PAUSE is pressed. Not all Options (TEMP) are available with
all Cycles. To change settings after the cycle has started,
press START/PAUSE, then select the desired settings. Press
and hold START/PAUSE (for approximately 3 seconds) to
con
tinue the cycle.
Preset Cycle Settings
Each cycle has a preset cycle time, temperature, and spin speed.
These settings provide the recommended fabric care for the
selected cycle. See chart.
Cycle Estimated
Time*
(hr:min)
Te mp Spin
Speed
Heavy Duty 1:22 Hot High
Normal 1:12 Warm High
Delicate 0:37 Cold Low
Rinse & Spin 0:26 Cold High
Drain & Spin 0:14 N/A High
Clean Washer with
AFFRESH™
0:54 N/A High
*The cycle times vary automatically
based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
Heavy Duty
Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and high-speed spin to shorten
drying times.