Operating instructions

PRODUCT IDENTIFICATION
9
MODEL # MFG. # DESCRIPTION
DCS9*
P1257102F,
P1257104F,
P1257106F
Amana® Distinctions™ Brand 90% Gas Furnace, Downflow/Horizontal Left and Right, 40" tall,
Induced Draft, furnace design changes that include new two tone grey painted cabinet and front
panels, PSC motor, standardized blower decks and a Carbide Mini-Igniter. Left or right gas pipe
entry. The furnaces also feature an integrated electronic ignition control and aluminized steel
tubular heat exchanger. NOx Certified. Chassis sizes are now 17.5", 21" and 24.5" wide.
DCS9*
P1257107F
P1257108F
Amana® Distinctions™ Brand 90% Gas Furnace, Downflow/Horizontal Left and Right, 40" tall,
Induced Draft, furnace design changes that include new two tone grey painted cabinet and front
panels, PSC motor, standardized blower decks and a Carbide Mini-Igniter. Left or right gas pipe
entry. The furnaces also feature an integrated electronic ignition control and aluminized steel
tubular heat exchanger. NOx Certified. Chassis sizes are now 17.5", 21" and 24.5" wide.
(Note: The "P" numbers to the left include the following design changes.) Incorporates a
new crimped designed blower housing and a new blower deck. The crimped blower housing will
not fit inside of the previous "P" numbers for this same model. Redesigned 90° drain elbow by
adding a side drain port hole. The side port drain tube is only used when placing the furnace in
the horizontal left application.
DMS9*
P1256701F,
P1256706F
Amana® Distinctions™ Brand 90% Gas Furnace, Upflow/Horizontal Left or Right, 40" tall,
Induced Draft, furnace design changes that include new two tone grey painted cabinet and front
panels, PSC motor, standardized blower decks and a Carbide Mini-Igniter. Left or right gas pipe
entry. The furnaces also feature an integrated electronic ignition control and aluminized steel
tubular heat exchanger. NOx Certified. Chassis sizes are now 17.5", 21" and 24.5" wide.
DMS9*
P1256707F
through
P1256710F
Amana® Distinctions™ Brand 90% Gas Furnace, Upflow/Horizontal Left or Right, 40" tall,
Induced Draft, furnace design changes that include new two tone grey painted cabinet and front
panels, PSC motor, standardized blower decks and a Carbide Mini-Igniter. Left or right gas pipe
entry. The furnaces also feature an integrated electronic ignition control and aluminized steel
tubular heat exchanger. NOx Certified. Chassis sizes are now 17.5", 21" and 24.5" wide.
(Note: The "P" numbers to the left include the following design changes.) Incorporates a
new crimped designed blower housing and a new blower deck. The crimped blower housing will
not fit inside of the previous "P" numbers for this same model. Redesigned 90° drain elbow by
adding a side drain port hole. The side port drain tube is only used when placing the furnace in
the horizontal left application.