Owner's Manual

Cedar Rapids, IA 52404 Page 22 of 24

Part No. 20217501

Original Instructions

User Options

There are several options you can change to customize the operation of the

oven for your business� The table on page 23 shows these options;

the factory setting is shown in bold type.

Access and Modify User Options:

1� Touch the blue menu icon at the bottom of the screen�

2� Scroll down and touch to select “User Options.”

3� Use this menu to modify oven settings�

Touch the left arrow to return to the menu after making each change�

Note: You may also make user options changes using the ACP

Programming Application�

Note: Programming the preheat temperature in the user options menu will

set the oven to heat to a certain temperature each time it is powered on

ALLOW MANUAL COOK

Allow Manual Cook option must be enabled in order to

view Allow Manual Save options�

CLEAN FILTER REMINDER

When “Clean Filter” message displays, clean air lters thoroughly.

Cleaning the air lters will not shut o󰀨 message.

Message will automatically stop displaying after 24 hours�

a� Check “Filter Cleaned” box to conrm clean.

b� Select “Dismiss” to close popup.

Note: If “Filter Cleaned” box is checked, reminder time resets�

Necessary cleaning frequency of air lters dependant on microwave use and

environmental conditions� Once frequency is determined, set the user option for

appropriate time frame�

Air lters and vents must be cleaned regularly to prevent overheating of oven.

Refer to “1. Clean Air Filters” on page 21 for cleaning instructions.

PIN CODE

If enabling PIN Code, select a 4-digit numeric PIN� PIN Code must be enabled

before trained technician may enter Service Mode

PREHEAT WARNING

To guarantee that oven reaches the desired temperature before the start of cook

cycle, enable Preheat Warning in user options� Enable setting when using recipe

with di󰀨erent starting temperature than default Preheat Temperature

TIME AND DATE

This oven maintains a data log of information, including date and time of operation�

This information is used to diagnose and troubleshoot errors� An accurate date and

time are important for the data log�

1� Select Time� Choose format (12 HR or 24 HR)� Enter local time�

2� Touch the left arrow to return�

3� Select Date� Choose format (MM/DD/YYYY or DD/MM/YYYY)�

Enter today’s date�

4� Touch the left arrow to return�