Owner's Manual

©2018 ACP, Inc.
Cedar Rapids, IA 52404 Page 24 of 24
Part No. 20217501
Original Instructions
Before Calling for Service
PROBLEM POSSIBLE CAUSE
Oven does not operate Conrm oven is plugged in.
Conrm oven is connected to a grounded circuit.
Check fuse or breaker�
Oven operates intermittently Check air lters and discharge air vents
If oven does not accept entries when
pad is pressed
Make sure oven is preheated� Open and close door, press pad again�
Oven fan turns on while oven is not
preheating or cooking
Normal operation
When I turn the oven OFF, the display
is still lit
Normal operation
Clean Filter displays This is normal and will appear for 24 hours�
Frozen oven display Oven display needs to reset�
Models without reset button:
Unplug oven� Wait 5 seconds� Plug back in�
Models equipped with reset button:
a� Remove front magnetic air lter.
b� Reach through far left hand air intake hole and press upwards on button to
reset oven
“G0” error displays on screen Oven Exceeded Max� Temp�
After oven cools, press the red reset button found on the
back, bottom-right hand corner of unit�
If “G0” error continues to appear, or reoccurs,
contact ACP, Inc� ComServ Customer Service
⚠
WARNING
To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time�
Only an authorized servicer should remove outer case�
This is a Class A product� In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures�
email: [e-mail]
For full product documentation visit:
www.acpsolutions.com
Amana® Commercial ARX
Contact:
Menumaster® MRX
Contact: