Unit installation

ManualsBrandsAmana ManualsAir ConditionerPCC**C

ATTENTION INSTALLING PERSONNEL

As a professional installer you have an obligation to

know the product better than the customer. This

includes all safety precautions and related items.

Prior to actual installation, thoroughly familiarize yourself

with this Instruction Manual. Pay special attention to all

safety warnings. Often during installation or repair it is

possible to place yourself in a position which is more

hazardous than when the unit is in operation.

Remember, it is your responsibility to install the product

safely and to know it well enough to be able to instruct

a customer in its safe use.

Safety is a matter of common sense...a matter of

thinking before acting. Most dealers have a list of

specific good safety practices...follow them.

The precautions listed in this Installation Manual should

not supersede existing practices but should be

considered as supplemental information.

Amana

Fayetteville, TN 37334

higher standard of comfor

Heating

Air Conditioning

RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.

Installation

Instructions

February 1999

Rev. 1

10730411

PCC**C

Single Package

Cooling Unit

Affix this manual, Specification Sheet and User

Information manual adjacent to the unit.

Contents

I. Safety Information ................................................. 2

II. General Information .............................................. 2

III. Rigging and Handling ........................................... 3

IV. Duct Connections ................................................. 3

V. Electrical Wiring .................................................... 3

Vl. Circulating Air and Filters .................................... 4

VII. Condensate Drain.................................................. 7

VIII. Normal Sequence of Operations ......................... 7

IX. Startup and Adjustment........................................ 7

X. Maintenance .......................................................... 8

XI. Accessories ........................................................... 8

Summary of content (8 pages)

PAGE 1
® Heating ¡ Air Conditioning A higher standard of comfort PCC**C Single Package Cooling Unit Installation Instructions Affix this manual, Specification Sheet and User Information manual adjacent to the unit. Contents I. II. III. IV. V. Vl. VII. VIII. IX. X. XI. Safety Information ................................................. 2 General Information .............................................. 2 Rigging and Handling ........................................... 3 Duct Connections ....................
PAGE 2
Unit Placement I. Safety Information WARNING Important To prevent death, personal injury, property damage or equipment damage, the following points must be observed when installing the unit. TO THE INSTALLER Before installing this unit please read this manual and the Specification Sheet to familiarize yourself on the specific items which must be adhered to such as maximum external static pressure to unit, air temperature rise, minimum or maximum CFM and motor speed connections.
PAGE 3
The unit should be carefully inspected upon arrival for damage and bolts or screws which may have loosened in transit. In the event of damage, the consignee should: 1. Make notation on delivery receipt of any visible damage to shipment or container. 2. Notify carrier promptly and request an inspection. 3. In case of concealed damage, carrier should be notified as soon as possible-preferably within 5 days. 4. File the claim with the following supporting documents within the 9 month statute of limitations. a.
PAGE 4
CAUTION sun, television, etc. Consult the Instruction Sheet packaged with thermostat for mounting instructions. To avoid personal injury or property damage due to fire, use only copper conductors. WARNING To avoid death or personal injury due to electrical shock, disconnect the electrical power before electrically connecting the unit. CAUTION To prevent improper and dangerous operation due to wiring errors, label all wires prior to disconnection when servicing controls.
PAGE 5
5 Figure 3 Low Voltage Terminal Board Wiring Diagram L1 CC 2 5 C START RELAY L2 T2 208/230 VAC 1Ø WARN ING :DISCO NNECT POWER BEFO RE SERVIC ING .
PAGE 6
Units are shipped from the factory ready for horizontal airflow. If conversion to vertical airflow is necessary, proceed as follows: Airflow 1. Cut insulation around bottom openings and remove panels from the bottom of the unit, saving the screws holding the panels in place. 2. From the rear of the unit, remove the four screws securing the blower assembly in place and loosen the two screws directly below the duct opening (Figure 4). 3.
PAGE 7
If using the Over/Under Transition Kit, the filter(s) may be located in the return air duct(s) or return air filter grille(s). Filters installed external to the unit should be sized in accordance with their manufacturer recommendations. A throwaway filter must be sized for a maximum face velocity of 300 feet per minute.
PAGE 8
Compressor Protection Device Clean Outside Coil (Qualified Servicer Only) The PCC**C compressor includes components which are designed to protect the compressor against abnormal operating conditions. The coil with the outside air flowing over it should be inspected annually and cleaned as frequently as necessary to keep the finned areas free of lint, hair and debris. WARNING Condenser and Evaporator Motors Bearings on the evaporator motor and the condenser motor are permanently lubricated.