PTAC Brochure and Specs

17
Specifications and Accessories Catalog
Accessories (cont.)
poWer vent Kit
Installation of Power Vent increases CFM up to
approximately 95. Vent door will automatically close
when unit fan is o.
FaCtory inStalled Feature Code - V
R-410A models must have these kits installed at
the factory.
CondenSer baFFle Kit
For use on non-baled grilles. These deflectors direct
the air in toward the center and away from the inlet to
prevent recirculation of the hot condenser air.
Sub-baSe extenSion Cover Kit
Converts older 30-amp sub-bases to allow for installation
of the larger 30-amp LCDI power cord and plugs.
SeCurity Key loCKS
In conjunction with the tamper-resistant front, the
installation of Amana® brand security key locks prevents
tampering of the controls used to set temperature, heating
and cooling functions. UL approved for institutional
use only.
CondenSate removal pump
Can be field-installed. Assists in removing condensate
developed by heat pump operation and transfers it to
indoor coil to dissipate into room while adding humidity
to the room.
FaCtory inStalled Feature Code - P
PVK3A 230/208V – R-22
PVK4A 265V – R-22
duCt extenSion Kit
Extends air distribution to an adjoining room. Consists
of a main duct for the room of origin and an extension
duct to reach the adjoining room and terminal duct.
PTDK01A allows for the “B” series unit to work with the
“A” series duct kits.
MDK02B Main Duct – R-22
MDK01E Main Duct – R-410A
EDK02B 42" Extension Duct
TRANSITION BAFFLES
Main Duct Kit
TDK02B Terminal Duct
PTDK01A Transition Duct Only – R-22
PTDK01E Transition Duct Only – R-410A
Extension Duct Kit
Terminal Duct Kit
DGK1B Condenser Bale Kit
SBEC10A 10 Pack
Basepan
Condenser
Condenser Baffles
KL03B Security Key Lock (R-22)
KL03E Security Key Lock (R-410A)
CDP302 230/208V – R-22
CDP402 265V – R-22
CDP303E 230/208V – R-410A