Operation Manual

10
Remove garden fresh crispers by completing the following
steps:
Caution
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
1. Remove crisper drawer by pulling out then lifting front
upward.
2. Remove crisper shelf by lifting front of shelf while
supporting underneath then pulling out.
3. Replace crispers and shelf by reversing steps 1–2.
Dairy Center (some models)
Dairy center provides convenient storage for items such
as butter, cheese, etc.
Dairy Center is adjustable to accommodate storage
needs. Dairy Center may also be removed for cleaning by
performing the following steps:
Remove Dairy Center cover by opening cover. Push
cover inward at pivot points and pull cover out. Lift Dairy
Center up and pull out to remove.
Replace Dairy Center by reversing procedure.
Dairy Center
Temperature Controlled Beverage
Chiller
(some models)
Temperature Controlled Beverage Chiller keeps beverages
up to 3°C colder than refrigerator section. Air inlet allows
air from freezer section to pass to beverage chiller. Air
inlet is located on interior wall of refrigerator door.
Beverage chiller control is located on left front wall of
refrigerator section. Control adjusts amount of air
circulating in beverage chiller. Turn control to
cold*
for
normal refrigerator temperature and to
colder**
for colder
temperature.
A
B
A. Refrigerator section left front wall
B. Temperature control
Beverage Chiller control illustration
Beverage Chiller position is adjustable to accommodate
storage needs. Beverage Chiller may also be removed for
cleaning. To remove Beverage Chiller perform the following
steps:
Grasp Beverage Chiller by sides lift up and pull out to
remove.
To replace, slide Beverage Chiller between desired
shelf rails in door liner and push Beverage Chiller down
into place.
Important
For proper operation of Beverage Chiller, one of the 3 cold
air intake holes must line up with notch in right door dike.
If Beverage Chiller door track is cleaned, door track
must be lubricated with petroleum jelly for proper
operation of chiller door.
A
B
C
D
E
A. Door liner shelf rail
B. Notch in door dike must line up with one of Beverage Chiller
cold air intake holes.
C. Flange
D. Beverage Chiller
E. Beverage Chiller Door track
Beverage Chiller