Submittal

ManualsBrandsAmana ManualsAir Conditioner Parts16 in. x 42 in. Single Pack Standard Stamped Aluminum Grille

SS-DPTAC www.amana-ptac.com 11/11

Amana® is a trademark of Maytag Corporaon or its related companies and used under license to Goodman Company, L.P., Houston, Texas. Supersedes 4/10

Assembled in the USA for 30 years:

Units are 100% run-tested and triple-

tested for leakage.

First-Year Warranty: Parts & Labor on enre unit

Second through Fih Year: Parts & Labor on certain sealed system components

Second through Fih Year: on certain funconal parts only

* Complete warranty details available at www.amana-ptac.com.

PTAC Air CondiTioners

And HeAT PumPs

ProduCT sPeCifiCATions

Product Features

• Quiet operaon: STC of 30

• Assembled in the USA for 30 years

• Increased dehumidicaon capacity

• 100% run-tested at our plant in Fayeeville, TN, for leaks

• 7⅝” unit front depth: one of the shallowest silhouees

in the industry today

• Removable condenser shroud allows easy access

to enable regular cleaning of coils

• Easy pull-out lters that are washable and easy to maintain

• Filter dryer for sealed system refrigerant

• 7-Buon touch pad provides complete control to guests

for in-room comfort while maintaining energy eciency

• Condensate dispersion system removes condensate

from indoor cooling operaon and evaporates it into

the atmosphere through the condenser

• Digismart™ front desk control and energy

management soware

• Room freeze protecon is acvated when the unit

senses temperatures of 40°F or below

• Versale style that blends into any room’s color

scheme and decor

• Easy to service with on-board led diagnoscs

• Digismart™ wireless remote thermostat is available

• Remote temperature sensing for guest climate control

• Extended heat pump heang down to as low as 24°F

outdoor ambient temperature

• Zero oor clearance allows unit to be installed ush

to a nished oor

• 30-second fan-o delay

• Compressor lock-in prevents compressor short-cycling

• Constant fan mode

• Hidden venlaon control

• High-pressure switch

11.7 EER / 3.4 COP

Control Board

Summary of content (8 pages)

PAGE 1
PTAC Air Conditioners and Heat Pumps 11.7 EER / 3.
PAGE 2
Product Specifications Nomenclature PTC 07 3 E 1,2,3 4 5 6 35 AXXX AA 7,8,9 10,11,12,13 14 Basic Model Type Engineering PTC Standard Cooler PTAC Major & Minor Revisions PTH Standard Heat Pump PTHP DRY Dehumid Cooler PTAC Features Code Cooling Capacity Standard Model C Corrosion Protec>on (Seacoast) 07 7000BTU/h 60 Hz D Power Door 09 9000 BTU/h 60 Hz E Future Use 12 12000 BTU/h 60 Hz F
PAGE 3
Product Specifications Product Specifications: PTC Models — Cooling/Electric Heat 230/208 Volts Model ¹, ⁶, ⁸, ⁹ Voltage ¹, ³ Capacity (BTU/h) PTC 073E**AXXX PTC 093E**AXXX PTC 123E**AXXX PTC 153E**AXXX 230 / 208 230 / 208 230 / 208 230 / 208 14,000 / 13,600 7,600 / 7,500 8,700 / 8,500 11,500 / 11,200 Amps ¹² 3.5 / 3.5 4.1 / 4.1 5.6 / 5.6 7.0 / 7.0 Watts ¹² 650 / 630 775 / 725 1095 / 1075 1415 / 1375 EER 11.4 / 11.7 11.2 / 11.4 10.3 / 10.1 9.8 / 9.
PAGE 4
Product Specifications Product Specifications: PTC / PTH Models — Electric Heat Performance (Primary Heating for PTC Models; Auxiliary Heating for PTH Models; See below for Power Cord Configuration) Voltage Electric Heat (kW) No. of Stages Nominal Heating (BTU/h) @ 230V @ 208V @ 265V Total Watts6 Total Amps Min. Circuit Ampacity² MOP4 (amps) Power Cord 230/208V 2.5 1 8,500 6,800 -- 2,570 / 2,115 11.2 / 10.1 14.0 15 6-15 P 230/208V 3.5 1 12,000 9,900 -- 3,570 / 2,935 15.5 / 14.
PAGE 5
Product Specifications Product Specifications: PTH Models — Cooling/Heat Pump/Electric Heat 230208 Volts Model ¹, ⁶, ⁸, ⁹ Voltage ¹, ³ Capacity (BTU/h) Amps ¹² PTH 073E**AXXX PTH 093E**AXXX PTH 123E**AXXX PTH 153E**AXXX 230 / 208 230 / 208 230 / 208 230 / 208 7,600 / 7,500 9,000 / 8,900 11,500 / 11,100 14,000 / 13,900 3.5 / 3.5 4.1 / 4.1 5.6 / 5.6 7.0 / 7.0 Watts ¹² 650 / 620 770 / 765 1095 / 1065 1460 / 1465 EER 11.3 / 11.4 11.1 / 11.1 10.2 / 10.1 9.6 / 9.5 4.2 5.0 6.8 8.
PAGE 6
Product Specifications Product Specifications: PTH Models — Reverse-Cycle Heating Performance 230/208 Volts Heating Capacity ¹ Voltage ¹, ³ PTH 073E**AXXX PTH 093E**AXXX PTH 123E**AXXX PTH 153E**AXXX 230 / 208 230 / 208 230 / 208 230 / 208 BTU/h ⁵ 6,800 / 6,800 8,300 / 8,100 10,900 / 10,500 13,500 / 13,300 Amps ¹² 3.5 / 3.5 4.1 / 4.1 5.6 / 5.6 7.0 / 7.0 Watts ¹² 605 / 605 735 / 720 1040 /1020 1365 / 1345 COP5 3.3 / 3.3 3.3 / 3.3 3.1 / 3.1 2.9 / 2.
PAGE 7
Product Specifications Contractor's Bid Sheet Furnish and install air-cooled through-the-wall package terminal air conditioners amd heat pumps (assembled in the USA). Units are rated in accordance with the ARI (Air Conditioning & Refrigeration Institute) Standards 310/380-93, CSA (Canadian Standards Association) EEV certification programs and listed by U. L. (Underwriters Laboratories).
PAGE 8
Product Specifications New installations typically require a minimum of WS900D wall sleeve and an outdoor grille. Wall Sleeves (WS900E) The wall sleeve must be industry-accepted dimensions: 14⅛” depth x 42” width x 16¹/₁₆” height and constructed of G90 HDG galvanized steel with a baked corrosion-inhibiting urethane primer and baked-polyester topcoat enamel. Sleeve must be insulated and shipped with a weather resistant rear closure panel installed.