Handing Manual

8 4700/4800 Series Time Stamp Operation Manual
Printing Sample
Figure 10.
Incase the printing is required on paper
narrower than 65 mm (2 5/8”), install the
polyester sheet supplied as accessory
in between the bottom case and slide
plate as per illustration by placing the
sheet so as the edge cut side comes to
the right-hand side.
A is a portion of the polyester sheet
circled by dot line that has to be cut by
scissors or knife, incase the upper die
plate is not installed and the inner
printing hammer is removed to have the
printing on the very upper edge of the
paper.