Handing Manual

4700/4800 Series Time Stamp Operation Manual 1

Introduction

This manual explains how to use your 4700/4800 Series Time Stamp.

You are strongly encouraged to read this manual completely

before

using the 4700/4800 Time Stamp, and to retain it for future reference.

Preparation Before Use

(Refer to Fig. 1, 2, & 7)

To prevent possible damage of the machine during transit, shock

absorbing material has been put inside the machine body (hammer

section).

Prior to use, take off the case, lift up the clock and typewheel sections,

and then remove the packaging material under the ink ribbon.

How To Take Off The Case

(Refer to Fig. 1)

To take off the case, insert the key

into the key lock on the upper case,

and turn it. Holding the case with

both hands (see Figure 1), draw it

frontward a little and then lift it up.

Caution: When removing the case,

please pay attention not to

touch the clock hands!

ure 1.

Key