Operation Manual

PIX-3000x Operations Manual 15
Advanced Program Mode
The Advanced Program mode enables you to access the programming
features of the PIX-3000x through the LCD display. In this mode, you
can change the date and time, adjust for Daylight Saving Time, and Auto
Number the imprint.
Getting Around in Advanced Program Mode
The following will enable you to perform operations in the Advanced
Program mode:
To Enter the Program Mode
1. Remove the cover.
2. Press the PROGRAM button.
3. The Mode Indicator will illuminate and
the display will change from time and
date to blank with the cursor flashing
beneath the “ONE HOUR ADJUST”
category.
To Exit the Program Mode
1. Press the PROGRAM button.
2. The display will flash and the time and
date will appear
Note: To exit quickly and without saving,
press RESET.
Scrolling Through the Program Mode
1. Press the PROGRAM button.
2. The display will flash and the time and
date will appear
Note: To exit quickly and without saving,
press RESET.
Choosing a Program Category
Scroll the cursor to the desired category.
Press the ENTER button once to modify the
selected parameters.