Operation Manual

26 PIX-3000x Operations Manual
Character Table
The characters listed are used to design Symbol 1 and Symbol 2.
1. The maximum displacement (print length) of the print head is 150
dots, or 36 mm (1.4”). When viewed on the LCD display, this value
becomes a percentage, where the maximum allowable value is 99%.
2. To determine if your desired symbol will print, add the lengths of
each character used from the table. The total should be less than
150 dots or 99%.
a. Small characters are seven dots high and five dots wide, with a
length of seven dots (five dots for the character and two dots for
the space) or 16 cpi.
b. Large characters are nine dots high and eight dots wide, with a
length of ten dots (eight dots for the character and two dots for
the space) or 11 cpi.
c. YEAR, MONTH, DATE, DAY and TIME formats are each one
program code and may have larger lengths and percentages.
(Table continued on next page)