Operation Manual

TCX-45 www.amano.com/time
 1-800-253-9836 7
Enabling or Disabling Auto Print
1. Press the PROGRAM button until dA E PI
appears.
2. Press the CHANGE button until 0 hr P5 flashes in
the display. Press the ENTER button.
3. Press the CHANGE button until
A Pr I 4 flashes
in the display. Press the ENTER button.
4. Press the CHANGE button until the desired code
appears on the display, then press the Enter
button. The Auto Print codes are as follows:
5. Press the PROGRAM button to exit.
Wall Mounting
Placement considerations:
1. Remove the Cover and then remove the
Back Plate by pressing the tab on the
bottom of the clock as shown in the right-
hand figure.
Code Mode Description
P on
Auto
Print
Will automatically print a
single print when media is
inserted.
OFF
Manual
Print
Requires you to use the
PRINT button when
printing.
P:5 on DO NOT USE