TRU VIEW XL 201804

2. Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the

neutral wire into “N” and the ground wire into “G”.

3. Put the plate back and screw back.

FOR BATHROOM USE

If this unit is installed in a bathroom it must be protected by a GIF receptacle or circuit. If receptacle is

used it must be readily accessible.

To prevent electric shock, please be aware that this unit is an electrical appliance that is NOT watertight

and must be installed as to prevent water from entering unit. This must be installed away from shows,

tubs, etc. Never locate fireplace where it may fall into a bathtub or other water container.

All wiring connections to line power shall be in accordance with local building code requirements.

Inquires about local codes and regulations must be done prior to installation.