Installation and Operation Sheet

19
FIRE GLASS MEDIA-LOG INSTALLATION
1. Take off the front clear glass. There is a bracket that holds the front glass as shows below. Unscrew
the screw to take off the bracket. Turn around the bracket and insert it into the gap to hook and pull
out the glass.
2. Install the fire glass media. Pour the fire glass media into the tray as shows below. Feel free to use
any combination of fire glass media that you find most appealing.
3. Put back the front glass and screw back the bracket.
IMPORTANT: GLASS IS VERY SHARP - PLEASE WEAR PROTECTIVE GLOVES