Outdoor Installation Guide

4 INSTALLATION CONFIGURATIONS
For all TRU-VIEW-XL, BI-DEEP, & BI-SLIM Models
Side of
Fireplace
OUTDOOR INSTALLATIONS
A
B
The overhang (A) must extend at least 1/2 the roof-line height (B).
Height is measured from the base of the fireplace.
For example: if the roof-line (B) is 8’ above the base of the fireplace,
the overhang (A) must be at least 4’.
TRU-VIEW-XL, BI-DEEP & BI-SLIM electric fireplaces are suitable for installaon in outdoor areas
protected from direct water impingement. In addion to maintaining the listed mantel and combusbles
clearances, a rain protecon overhang factor of 1/2 shall be constructed to the front and to each side of
the installed appliance. See illustraon below. All wiring connecons to line power shall be in accordance
with local building code requirements.