Installation and Operation Sheet

7
MEDIA OPTIONS
Sable
DECORATIVE MEDIA INSTALLATION
STEP 1: Unplug the unit from wall and make
sure controls are switched off.
STEP 2: Push upwards (as shows in bellow
picture) and remove the front panel to decorate
your fireplace. Pour the decorative media into
the tray. Feel free to use any combination of fire
glass media that you find most appealing.
STEP 3: After finishing decoration, put back the
Log Set 11 pieces
Hold here firmly, then push upwards to take off
the front glass panel.
The glass panel is hooked by 2 hooks on each
side.
Then you can take off
the glass panel.
front glass panel.
Now you can start to decorate your fireplace
Your fireplace shipped with the following media:
3 bags of sable glass and an 11 piece log set.
Customers can decorate their fireplace
according to their wishes with supplied media.
This fireplace includes the following decorative
media: